Fast
delivery
free in mainland France
Payment
100% secure
Up to 3 times free of charges
Personalized
Pre-setting
of your absorber at the factory
Absorbers
2-year warranty
Except off-road and competition
The SportShock 4 is a shock absorber reserved for competition
It is a tri-tube low pressure gas volume compensator damper, even easier to adjust than the SportShock 3. The rebound settings (high and low speed) do not influence the compression settings (high and low speed)
So there is less compromise in the settings, which account 26 clicks.
Another advantage of the tri-tube system at low gas pressure is to keep the stability during the temperature variation unlike emulsion models and high pressure canister damper type.
The springs will be chosen on a case by case basis.
Levelling control option
This option allows to settle the length of the shock absorber. With this additional regulation, you have the possibility of changing the height of the machine, without affecting the regulation of the spring, to influencing on the geometry of the machine and so managing the handiness, the stability and the ground clearance. Two flat wrenches are enough for changing the height of the machine.
Hydraulic preload option
This option replaces the traditional method of spring setting by a hydraulic system. A thumb setting wheel taken up on the frame, or in certain cases directly on the shock absorber, the control the prestressed of the spring. This way of setting is very useful on a motorcycle of tourism to pass of a state of load in an other one as well as in competition to save time of development during the tries and in race during pitstops.
SPORTSHOCK 4 shock absorber
